Looking for:
How to Configure Default Device Access Behavior of Workspace app for Windows.Citrix XenDesktop/XenApp
Remote access to CAE software (Citrix XenApp)
This article is intended for Citrix administrators and technical teams only. Citrix Virtual Apps, formerly XenApp, fits the enterprise need to bring legacy apps into a cloud management environment. This article describes how to configure the default device access behavior of Receiver, XenDesktop and XenApp.
With the introduction of Receiver 3. With the default value, one of the following dialog boxes appear when accessing local files, webcams, or microphones:. Only Published Desktops will launch.
Currently being observed on Receiver 4. This is currently being looked into. If using Windows 10 machines and trying to launch applications using Google Chrome via NetScaler Gateway site, this might fail. This does not work for Windows 7 Machines. Working Scenarios: 1. Disabling Client Selective Trust 2. To configure default device access behavior of Citrix Workspace App, complete the following steps: Note : I n the ADM template there is the 'Create Client Service Trust Key' value, which can be used to automatically create all the required registry keys otherwise i mport registry keys first and make changes in registry values as explained and then apply ADM files and perform changes for ADM files.
If you have applied ADM files first and then registry changes, there could be a possibility of continued unresolved issues.
Both steps are required and should be applied in the correct order: Step 1. Registry Hive, Step 2. ADM File. It is also applicable for Citrix Receiver 4. Refer to the Disclaimer at the end of this article before using Registry Editor. Download the appropriate registry settings file that is attached to this article and import to a client device. Note : The attachment contains the file for a bit and a bit operating system. Note: If you have a bit operating system, you should use the x86 registry file and policies.
Support working with necessary teams to get naming of files clarified. This Key will be created every time a user makes changes in the preferences of Receiver. As this key has priority, it needs to be deleted at every reboot. Note : Included in the ZIP archive are the Group Policy ADM files specifically for x86 or x64 operating systems which create the required registry keys on the client machine and add the ability to modify the values as explained in the preceding section. If an Organizational Unit OU or group of computers contains multiple architectures, ensure to use a method such as Windows Management Instrumentation WMI filtering to apply the appropriate settings.
Failed to load featured products content, Please try again. Customers who viewed this article also viewed. Log in to Verify Download Permissions Templates.
Objective This article is intended for Citrix administrators and technical teams only. Background With the introduction of Receiver 3. With the default value, one of the following dialog boxes appear when accessing local files, webcams, or microphones: HDX File Access. Using Registry Editor incorrectly can cause serious problems that might require you to reinstall your operating system.
Citrix cannot guarantee that problems resulting from the incorrect use of Registry Editor can be solved. Use Registry Editor at your own risk. Be sure to back up the registry before you edit it. Was this page helpful? Thank you! Sorry to hear that. Name Name is required. Email Email address is required. Close Submit.
Featured Products. Need more help? Product issues. Open or view cases Chat live. Other support options. Share this page.
Citrix receiver xenapp.How to Configure Default Device Access Behavior of Workspace app for Windows
With the default value, one of the following dialog boxes appear when accessing local files, webcams, or microphones:. Only Published Desktops will launch. Currently being observed on Receiver 4. This is currently being looked into. If using Windows 10 machines and trying to launch applications using Google Chrome via NetScaler Gateway site, this might fail. This does not work for Windows 7 Machines.
Working Scenarios: 1. Disabling Client Selective Trust 2. To configure default device access behavior of Citrix Workspace App, complete the following steps: Note : I n the ADM template there is the 'Create Client Service Trust Key' value, which can be used to automatically create all the required registry keys otherwise i mport registry keys first and make changes in registry values as explained and then apply ADM files and perform changes for ADM files.
If you have applied ADM files first and then registry changes, there could be a possibility of continued unresolved issues. Both steps are required and should be applied in the correct order: Step 1. Registry Hive, Step 2. ADM File. It is also applicable for Citrix Receiver 4. Refer to the Disclaimer at the end of this article before using Registry Editor.
Download the appropriate registry settings file that is attached to this article and import to a client device. Note : The attachment contains the file for a bit and a bit operating system. Note: If you have a bit operating system, you should use the x86 registry file and policies.
Support working with necessary teams to get naming of files clarified. This Key will be created every time a user makes changes in the preferences of Receiver.
As this key has priority, it needs to be deleted at every reboot. Note : Included in the ZIP archive are the Group Policy ADM files specifically for x86 or x64 operating systems which create the required registry keys on the client machine and add the ability to modify the values as explained in the preceding section.
If an Organizational Unit OU or group of computers contains multiple architectures, ensure to use a method such as Windows Management Instrumentation WMI filtering to apply the appropriate settings.
Failed to load featured products content, Please try again. Local Host Cache. Manage security keys. Connection leasing.
Virtual IP and virtual loopback. Delivery Controllers. VDA registration. Use Search in Studio. User profiles. Citrix Insight Services. Citrix Scout. Session Recording. Get started with Session Recording. Install, upgrade, and uninstall Session Recording. Configure Session Recording.
Grant access rights to users. Create and activate recording policies. Create notification messages. Disable or enable recording. Enable or disable live session playback and playback protection. Enable and disable digital signing. Specify where recordings are stored. Specify file size for recordings. Log administration activities. Install Session Recording with database high availability. View recordings. Troubleshoot Session Recording.
Manage your database records. Configuration Logging. Event logs. Advanced configuration. Monitor deployments. Alerts and notifications. Delegated Administration and Director. Secure Director deployment. Configure network analysis. Troubleshoot user issues. Send messages to users. Restore sessions. Reset a Personal vDisk. Run HDX channel system reports.
Shadow users. Diagnose user logon issues. Record sessions. Restore desktop connections. Resolve application failures. Reset a user profile. Troubleshoot applications.
Troubleshoot machines. Feature compatibility matrix. Data granularity and retention. Troubleshoot Director failure reasons. Document History. Aviso legal. Este texto foi traduzido automaticamente. Este artigo foi traduzido automaticamente. XenApp and XenDesktop are virtualization solutions that give IT control of virtual machines, applications, licensing, and security while providing anywhere access for any device. If you currently have a 6. Each Site has one or more Delivery Controllers.
It is installed on at least one server in the data center. For Site reliability and availability, Controllers should be installed on more than one server. If your deployment includes virtual machines hosted on a hypervisor or cloud service, the Controller services communicate with it to distribute applications and desktops, authenticate and manage user access, broker connections between users and their virtual desktops and applications, optimize use connections, and load-balance these connections.
It does not have the option to use TCP port The Monitor Service collects historical data and places it in the Monitor database. This service uses TCP port 80 or The Controller manages the state of desktops, starting and stopping them based on demand and administrative configuration.
In some editions, the Controller allows you to install Profile Management to manage user personalization settings in virtualized or physical Windows environments. This database stores the data collected and managed by the services that make up the Controller. Install the database within your data center, and ensure it has a persistent connection to the Controller.
The Site also uses a Configuration Logging database and a Monitoring database. By default, those databases are installed in the same location as the Site database, but you can change this. The VDA is installed on each physical or virtual machine in your Site that you make available to users. Those machines deliver applications or desktops.
The VDA enables the machine to register with the Controller, which allows the machine and the resources it is hosting to be made available to users. VDAs establish and manage the connection between the machine and the user device, verify that a Citrix license is available for the user or session, and apply whatever policies have been configured for the session.
The broker agent hosts multiple plugins and collects real-time data. It communicates with the Controller over TCP port VDAs are available for Windows server and desktop operating systems. VDAs for Windows server operating systems allow multiple users to connect to the server at one time. VDAs for Windows desktop operating systems allow only one user to connect to the desktop at a time.
Linux VDAs are also available. StoreFront authenticates users to Sites hosting resources, and manages stores of desktops and applications that users access. It can host your enterprise application store, which gives users self-service access to the desktops and applications that you make available to them. This helps ensure users have a consistent experience across multiple devices. Studio is the management console that enables you to configure and manage your XenApp and XenDesktop deployment.
This console eliminates the need for separate management consoles to manage delivery of applications and desktops. Studio provides wizards to guide you through environment setup, creating your workloads to host applications and desktops, and assigning applications and desktops to users. You can also use Studio to allocate and track Citrix licenses for your Site.
Director is a web-based tool that enables IT support and help desk teams to monitor an environment, troubleshoot issues before they become system-critical, and perform support tasks for end users. Real-time session data from the Broker Service in the Controller. The License Server manages your Citrix product licenses. You must create at least one license server to store and manage your license files.
The hypervisor or cloud service hosts the virtual machines in your Site. A hypervisor is installed on a host computer dedicated entirely to running the hypervisor and hosting virtual machines. The following additional components, not shown in the illustration above, can also be included in XenApp or XenDesktop deployments. For more information, see their documentation. PVS is an optional component that is available with some editions.
It provides an alternative to MCS for provisioning virtual machines. PVS communicates with the Controller to provide users with resources. In deployments where virtual desktops are delivered to users at remote locations such as branch offices, Citrix NetScaler SD-WAN technology can be employed to optimize performance.
Repeaters accelerate performance across wide-area networks. For example, the user experience does not degrade in the branch location when a large file or print job is sent over the network. HDX WAN optimization provides tokenized compression and data deduplication, reducing bandwidth requirements and improving performance. A Site is made up of machines with dedicated roles that allow for scalability, high availability, and failover, and provide a solution that is secure by design.
The VDA enables users to connect to desktops and applications. It is installed on server or desktop machines in the data center for most delivery methods, but it can also be installed on physical PCs for Remote PC Access. The Controller is made up of independent Windows services that manage resources, applications, and desktops, and optimize and balance user connections.
Each Site has one or more Controllers. Because sessions are affected by latency, bandwidth, and network reliability, all Controllers ideally should be on the same LAN. Users never directly access the Controller. The VDA serves as an intermediary between users and the Controller. When users log on to the Site using StoreFront, their credentials are passed through to the Broker Service on the Controller. The Broker Service then obtains their profiles and available resources based on the policies set for them.
After the credentials are verified, information about available applications or desktops is sent back to the user through the StoreFront-Citrix Receiver pathway. When the user selects applications or desktops from this list, that information goes back down the pathway to the Controller. The Controller then determines the proper VDA to host the specific applications or desktop. The VDA accepts the connection and sends the information back through the same pathways to Citrix Receiver.
A set of required parameters is collected on StoreFront. As long as the Site was properly set up, the credentials remain encrypted throughout this process. If a connection is lost, the Session Reliability feature enables the user to reconnect to the VDA rather than having to relaunch through the management infrastructure. Session Reliability can be enabled or disabled in Citrix policies. The Controller sends this information to the Site database and starts logging data in the Monitoring database.
Every session produces data that IT can access through Studio or Director. Using Studio, administrators can access real-time data from the Broker Agent to manage sites. Director accesses to the same real-time data plus historical data stored in the Monitoring database.
Within the Controller, the Broker Service reports session data for every session on the machine providing real-time data. The Monitor Service also tracks the real-time data and stores it as historical data in the Monitoring database.
Studio communicates only with the Broker Service, so it accesses only real-time data. Director communicates with the Broker Service through a plugin in the Broker Agent to access the Site database.
You set up the machines that will deliver applications and desktops with machine catalogs. Then, you create Delivery Groups that specify the applications and desktops that will be available using some or all of the machines in the catalogs , and which users can access them.
Machine catalogs are collections of virtual or physical machines that you manage as a single entity. These machines, and the application or virtual desktops on them, are the resources you provide to users. All of the machines in a catalog have the same operating system and the same VDA installed.
No comments:
Post a Comment